Owner manual

eKINO-945GSE Motherboard
Page 4
 1 x Infrared connector
 1 x Keyboard/mouse connector
 1 x LCD backlight inverter connector
 1 x LVDS connector
 1 x PCIe Mini slot
 2 x SATA drive connectors
 2 x SATA power connectors
 2 x Serial port connectors (RS-232)
 1 x Serial port connector (RS-422/485)
 1 x SO-DIMM socket
 1 x TV output connector
 1 x USB pin header (2 ports)
The eKINO-945GSE has the following external peripheral interface connectors on the
board rear panel.
 1 x Audio stereo output
 1 x Audio microphone input
 1 x DVI
 2 x LAN
 2 x RS-232 serial ports
 4 x USB 2.0
 1 x VGA
The eKINO-945GSE has the following on-board jumpers:
 AT/ATX selection
 Clear CMOS
 CompactFlash® card setup
 COM3 RS-232/422/485 selection
 LCD panel type selector
 LCD voltage selector
 UPS enable/disable
 UPS/Battery mode selection