Owner manual

ECW-281B Embedded System
Page 149
Step 7: The recovery tool menu appears. (
788H788H870H870H870HFigure B-25)
Figure B-25: Recovery Tool Menu
Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section
789H789H871H871H871HB.2.5 to create a factory default image.
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.