Owner manual

ECW-281B Embedded System
Page 133
o RedHat 9 (Ghirke)
o Ubuntu 8.10 (Intrepid)
o Ubuntu 7.10 (Gutsy)
o Ubuntu 6.10 (Edgy)
o Debian 5.0 (Lenny)
o Debian 4.0 (Etch)
o SuSe 11.2
o SuSe 10.3
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore Windows system, a few setup
procedures are required.
Step 1: Hardware and BIOS setup (see Section
769H769H851H851H851HB.2.1)
Step 2: Create partitions (see Section
770H770H852H852H852HB.2.2)
Step 3: Install operating system, drivers and system applications (see Section
771H771H853H853H853HB.2.3)
Step 4: Build-up recovery partition (see Section
772H772H854H854H854HB.2.4)
Step 5: Create factory default image (see Section
773H773H855H855H855HB.2.5) Step 0:
The detailed descriptions are described in the following sections.