Owner manual

ECW-281B Embedded System
Page 123
Step 5: Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle
(
841H841H841HFigure 7-2).
Figure 7-2: SO-DIMM Installation
Step 6: Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See
842H842H842HFigure 7-2)
Step 7: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.Step 0: