User guide

ECW-281B-D2550 Embedded System
Page 72
 IGFX - Boot Type [VBIOS Default]
Use the IGFX - Boot Type option to select the display device used by the system when it
boots. Configuration options are listed below.
 VBIOS Default
DEFAULT
 CRT
 Fixed Graphics Memory Size [128MB]
Use the Fixed Graphics Memory Size option to specify the maximum amount of memory
that can be allocated as graphics memory. Configuration options are listed below.
 128MB D
EFAULT
 256MB
5.4.2 South Bridge Configuration
Use the South Bridge Configuration menu (BIOS Menu 17) to configure the
Southbridge chipset.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
Power Saving Function(ERP) [Disabled]
Azalia Controller [Enabled]
Set Spread Spectrum function [Disabled]
Select AC power state
when power is re-applied
after a power failure.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 17: South Bridge Configuration