User guide

ECW-281B-D2550 Embedded System
Page 23
Figure 3-11: Remove the Retention Screws for the Half-size PCIe Mini Card
Step 4: Line up the notch on the PCIe Mini card with the notch on the connector. Slide
the card into the socket at an angle of about 20º (
Figure 3-12).
Figure 3-12: Insert the Half-size PCIe Mini Card into the Socket at an Angle
Step 5: Secure the half-size PCIe Mini card with the two retention screws previously
removed (
Figure 3-13).