User guide

ECW-281B-D2550 Embedded System
Page 129
Figure A-43: Disable Automatically Restart
Step 2: Configure the following BIOS options of the client system.
Advanced → iEi Feature → Auto Recovery Function → Enabled
Advanced → iEi Feature → Recover from PXE → Enabled
Boot → Launch PXE OpROM → Enabled
Step 3: Continue to configure the Boot Option Priorities BIOS option of the client
system:
Boot Option #1  remain the default setting to boot from the original OS.
Boot Option #2  select the boot from LAN option.
Step 4: Save changes and exit BIOS menu.
Exit  Save Changes and Exit
Step 5: Install the auto recovery utility into the system by double clicking the
Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility
MUST be installed in the system, otherwise, the system will automatically
restore from the factory default image every ten (10) minutes.