User guide

ECW-281B-D2550 Embedded System
Page 113
process (The default option is YES). It is suggested to choose YES for this
option.
Figure A-27: Factory Default Image Confirmation
Step 8: The Symantec Ghost starts to create the factory default image (
Figure A-28).
Figure A-28: Image Creation Complete
Step 9: After completing the system configuration, press any key in the following window
to restart the system.
Figure A-29: Press any key to continue
Step 10: Eject the One Key Recovery CD and restart the system.
Step 11: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.