User guide

ECW-281B-D2550 Embedded System
Page 109
Step 11: When the image creation completes, a screen prompts as shown in 76Figure A-20.
Click Continue and close the Ghost window to exit the program.
Figure A-20: Image Creation Complete
Step 12: The recovery tool main menu window is shown as below. Press any key to
reboot the system. Step 0:
Figure A-21: Press Any Key to Continue
A.3 Auto Recovery Setup Procedure
The auto recovery function allows a system to automatically restore from the factory
default image after encountering a Blue Screen of Death (BSoD) or a hang for around 10
minutes. To use the auto recovery function, follow the steps described in the following
sections.