User Manual

ECW-281B/B2-D525 Embedded System
Page 46
Figure 4-16: Mounting the DIN RAIL
Step 4: Secure the DIN rail to the mounting bracket by turning the top screw clockwise.
This draws the lower clamp up and secures the embedded system to the DIN
rail (
765Figure 4-17).
Figure 4-17: Secure the Assembly to the DIN Rail
4.2.9 Wireless Antenna Installation (Wireless Models Only)
To install an antenna to the wireless ECW-281B/B2-D525 series for efficient wireless
network transmission, follow the steps below.
Step 1: Locate the antenna connector on the rear panel of the embedded system (refer
to
765Figure 2-3).
Step 2: Install the antenna to the antenna connector (
765Figure 4-18).