Instruction Manual

ECN-780-Q67 Embedded System
Page 109
6.7 USB 3.0 Driver Installation
To install the USB 3.0 driver, please do the following.
Step 1: Access the driver list. (See Section 6.2)
Step 2: Click “USB 3.0” and select the folder which corresponds to your operating
system.
Step 3: Double click the setup file.
Step 4: The Welcome Screen in Figure 6-24 appears.
Step 5: Click Next to continue.
Figure 6-24: USB 3.0 Driver Welcome Screen
Step 6: Browse for an inst1all location or use the one suggested (Figure 6-25).
Step 7: Click N
EXT to continue.