Instruction Manual

ECN-780-Q67 Embedded System
Page 87
 Maximum DEFAULT
 IGD - Boot Typ e [VBIOS Default]
Use the IGD - Boot Type option to select the display device used by the system when it
boots. For dual display support, select “Auto.” Configuration options are listed below.
 VBIOS Default
DEFAULT
 CRT
 DVI-D
 HDMI
5.5.4 ME Subsystem
Use the ME Subsystem menu (BIOS Menu 22) to configure the Intel® Management
Engine (ME) configuration options.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Intel ME Subsystem Configuration
ME Version 7.0.10.1203
MEBx Mode [Normal]
Unconfigure AMT/ME [Disabled]
MEBx Mode Help
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 22: ME Subsystem
 MEBx Mod e [Normal]
Use the MEBx Mode option to configure MEBx Mode options.

Normal DEFAULT
Enables normal mode