Manual

ECN-680A-H61 Embedded System
Page 43
Connector Type Label
SATA power connectors 2-pin wafer CN1, CN2
SMBus connector 4-pin wafer SMBUS1
SO-DIMM connector SO-DIMM connector SO-DIMM1
Speaker connector 4-pin wafer SPEAKER1
SPI Flash connector 6-pin wafer JSPI2
SPI Flash connector (EC) 6-pin wafer JSPI1
K Type thermocouple connectors 2-pin wafer CN5, CN6
USB 2.0 connectors 9-pin wafer USB0_1, USB2_3
Table 4-1: Peripheral Interface Connectors
4.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the ECN-680A-H61.
4.2.1 Battery Connector
CN Label: BAT1
CN Type:
2-pin wafer
CN Location: See Figure 4-3
CN Pinouts: See Table 4-2
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.