Manual

ECN-680A-H61 Embedded System
Page 26
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.8 Reset the System
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps below.
Step 1: Locate the reset button on the rear panel (Figure 3-5).
Figure 3-16: Reset Button Location
Step 2: Press the reset button. Step 0:
3.9 Powering On/Off the System
To power on the system, follow the steps below:
Step 1: Press the power button on the front panel for 3 seconds (Figure 3-17).
Step 2: Once turned on, the power LED should light up.
To power off the system, follow the steps below:
Step 1: Press the power button on the front panel for 6 seconds (Figure 3-17).