Manual

ECN-680A-H61 Embedded System
Page 20
Step 7: Orientate the CPU properly. The contact array should be facing the CPU
socket.
Step 8: Correctly position the CPU. Match the Pin 1 mark with the CPU edge on the
CPU socket.
Step 9: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
Carefully match the two orientation notches on the CPU with the socket
alignment keys.
Step 10: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly. See
Figure 3-8.
Figure 3-8: Insert the CPU
Step 11: Close the CPU socket. Close the load plate and pull the load back a little to
have the load plate be able to secure to the knob. Engage the load lever by
pushing it back to its original position. See Figure 3-9. There will be some
resistance, but will not require extreme pressure.