Manual

ECN-680A-H61 Embedded System
Page 17
Step 4: Lift the fan module out of the ECN-680A-H61 and locate the SO-DIMM socket
(
336HFigure 3-3).
Figure 3-3: SO-DIMM Socket Location
Step 5: Install the DDR3 memory module by pushing it into the socket at an angle
(
543HFigure 3-4).
Step 6: Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR3 memory module down (
544HFigure 3-4).
Step 7: Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR3 memory module in the socket.
Figure 3-4: DDR3 SO-DIMM Module Installation