Manual

ECN-680A-H61 Embedded System
Page 16
3.3 Memory Module Installation
To install the memory module, please follow the steps below:
Step 1: Remove two retention screws from the right side, two from the left side and one
from the rear panel, as shown in
335HFigure 3-1.
Figure 3-1: Retention Screws Removal
Step 2: Remove the top cover from the device.
Step 3: Remove the eight fan bracket retention screws and disconnect the fan
connector (CPU_FAN1), as shown in
335HFigure 3-2.
Figure 3-2: Fan Removal