Manual

ECN-680A-H61 Embedded System
Page 86
 Maximum DEFAULT
 IGD - Boot Type [VBIOS Default]
Use the IGD - Boot Type option to select the display device used by the system when it
boots. For dual display support, select “Auto.” Configuration options are listed below.
 VBIOS Default
DEFAULT
 DVI-I
 DVI-D
 HDMI
5.6 Boot
Use the Boot menu (383HBIOS Menu 20) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Option ROM Messages [Force BIOS]
Launch PXE Boot [Disabled]
UEFI Boot [Disabled]
Boot Option Priorities
Boot Option #1 [SATA PM ： SAMSUNG…]
Hard Drive BBS Prioties
Select the keyboard
NumLock state
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 20: Boot
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.