Manual

ECN-360A-HM65 Embedded System
Page 51
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in Table 4-30.
Setting Description
Short 1 - 2 Keep CMOS Setup (Default)
Short 2 - 3 Clear CMOS Setup
Table 4-30: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in Figure 4-25 below.
Figure 4-25: Clear CMOS Jumper
4.4.3 LVDS Voltage Selection Jumper
Warning:
Incorrect voltages can destroy the LCD panel. Make sure to select a
voltage that matches the voltage required by the LCD panel.
Jumper Label: J _VLVDS 1
Jumper Type:
3-pin header
Jumper Settings: See Table 4-31
Jumper Location: See Figure 4-26
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.