Manual

ECN-360A-HM65 Embedded System
Page 29
Pin Description
1 Battery+
2 Ground
Table 4-4: Battery Connector Pinouts
4.2.3 Digital Input/Output (DIO) Connector
CN Label: DIO1
CN Type:
10-pin header (2x5)
CN Location: See Figure 4-4
CN Pinouts: See Table 4-5
The digital input/output connector is managed through a Super I/O chip. The DIO
connector pins are user programmable.
Figure 4-4: DIO Connector Location
Pin Description Pin Description
1 GND 2 +5V
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
Table 4-5: DIO Connector Connector Pinouts