Owner's manual

ECN-360A-D2550 Embedded System
Page 72

Off
Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled DEFAULT
OEM Logo displayed instead of POST messages
 Launch PXE OpROM [Dis abled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled DEFAULT
Ignore all PXE Option ROMs

Enabled
Load PXE Option ROMs.
 Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
DEFAULT
Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.
 UEFI Boot [Dis abled]
Use the UEFI Boot BIOS option to allow the system to boot from the UEFI devices.


Disabled DEFAULT
Disables to boot from the UEFI devices.


Enabled
Enables to boot from the UEFI devices.