Owner's manual

ECN-360A-D2550 Embedded System
Page 70
5.4.2 South Bridge Configuration
Use the South Bridge Configuration menu (BIOS Menu 17) to configure the
Southbridge chipset.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled]
Restore AC Power Loss [Last State]
Power Saving Function(ERP) [Disabled]
Set Spread Spectrum function [Disabled]
Select AC power state
when power is re-
applied
after a power failure.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 17: South Bridge Configuration
 Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.

Power Off
The system remains turned off

Power On
The system turns on

Last State DEFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
 Power Saving Function(ERP) [Dis abled]
Use the Power Saving Function(ERP) option to enable or disable the power saving
function.

Disabled DEFAULT
Disables the power saving function.

Enabled
Enables the power saving function.