Owner's manual

ECN-360A-D2550 Embedded System
Page 69
 IGFX - Boot Typ e [VBIOS Default]
Use the IGFX - Boot Type option to select the display device used by the system when it
boots. Configuration options are listed below.
 VBIOS Default
DEFAULT
 CRT1
 CRT2
 LVDS1
 LVDS 1 Panel Type [800x600 LVDS]
Use the LVDS1 Panel Type option to select the type of flat panel connected to the system.
Configuration options are listed below.
 640x480 LVDS
 800x600 LVDS D
EFAULT
 1024x768 LVDS
 1280x1024 LVDS
 1366x768 LVDS
 1224x600 LVDS
 1280x800 LVDS
 Backlight Control [In ve rte d ]
Use the Backlight Control option to select the backlight control mode.

Normal
Brightest at high voltage level

Inverted DEFAULT
Brightest at low voltage level
 Fixed Graphics Me m o ry Size [128MB]
Use the Fixed Graphics Memory Size option to specify the maximum amount of memory
that can be allocated as graphics memory. Configuration options are listed below.
 128MB D
EFAULT
 256MB