Owner's manual

ECN-360A-D2550 Embedded System
Page 55
 Hyper-Threading [Enabled]
Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading
Technology.

Disabled
Disables the Intel Hyper-Threading Technology.

Enabled DEFAULT
Enables the Intel Hyper-Threading Technology.
5.3.4 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 6) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0 Not Present
SATA Port1 Not Present
Configure SATA as [IDE]
Select a configuration
for SATA Controller.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
 Configure S ATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE or AHCI
devices.

IDE DEFAULT
Configures SATA devices as normal IDE device.

AHCI
Configures SATA devices as AHCI device.