Owner's manual

ECN-360A-D2550 Embedded System
Page 45
Figure 4-22: Clear CMOS Jumper Location
4.4.3 LVDS 1 Voltage Selection
WARNING:
Permanent damage to the screen and ECN-360A-D2550 may occur if
the wrong voltage is selected with this jumper. Please refer to the user
guide that came with the monitor to select the correct voltage.
Jumper Label: JP3
Jumper Type:
3-pin header
Jumper Settings: See Table 4-25
Jumper Location: See Figure 4-23
Sets the voltage provided to the monitor by LVDS1.
Setting Description
Short 1-2 +3.3V LVDS (Default)
Short 2-3 +5V LVDS
Table 4-25: LVDS1 Voltage Selection Jumper Settings