Owner's manual

ECN-360A-D2550 Embedded System
Page 44
Setting Description
Off Use AT power
Table 4-23: AT/ATX Power Selection Jumper Settings
Figure 4-21: AT/ATX Power Selection Jumper Location
4.4.2 Clear CMOS Jumper
Jumper Label: J P2
Jumper Type:
3-pin header
Jumper Settings: See Table 4-24
Jumper Location: See Figure 4-22
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
Setting Description
Short 1-2 Normal (Default)
Short 2-3 Clear BIOS
Table 4-24: Clear CMOS Jumper Settings