Owner's manual

ECN-360A-D2550 Embedded System
Page 38
NOTE:
The SATA1 connector will be disabled when an mSATA device is
installed to the M_PCIE1 slot.
Figure 4-15: SATA Drive Connector Locations
Pin Description
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
Table 4-16: SATA Drive Connector Pinouts
4.2.15 SO-DIMM Connector
CN Label: DIMM1
CN Type:
204-pin DDR3 SO-DIMM connector
CN Location: See Figure 4-16
The SO-DIMM connector is for installing memory on the system.