Owner's manual

ECN-360A-D2550 Embedded System
Page 32
The keyboard and mouse connector can be connected to a standard PS/2 cable or PS/2
Y-cable to add keyboard and mouse functionality to the system.
Figure 4-9: Keyboard/Mouse Connector Location
Pin Description
1 VCC
2 Mouse Data
3 Mouse Clock
4 Keyboard Data
5 Keyboard Clock
6 GND
Table 4-10: Keyboard/Mouse Connector Pinouts
4.2.9 LVDS 1 Connector
CN Label: LVDS 1
CN Type:
20-pin crimp
CN Location: See Figure 4-10
CN Pinouts: See Table 4-11
The 20-pin LVDS LCD connector can be connected to an 18-bit/24-bit single-channel
LVDS panel.