Owner's manual

ECN-360A-D2550 Embedded System
Page 28
Figure 4-4: Backlight Inverter Connector Location
Pin Description
1
LCD_BKLTCTL
2
GROUND
3
+12V
4
GROUND
5
BACKLIGHT ENABLE
Table 4-5: Backlight Inverter Connector Pinouts
4.2.4 Battery Connector
CN Label: CN1
CN Type:
2-pin wafer
CN Location: See Figure 4-5
CN Pinouts: See Table 4-6
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.