Owner's manual

ECN-360A-D2550 Embedded System
Page 26
4.2 Internal Peripheral Connectors
The section describes all of the connectors on the motherboard.
4.2.1 5 V SATA Power Connectors
CN Label: S ATA_PWR1, S ATA_P WR2
CN Type:
2-pin wafer
CN Location: See Figure 4-2
CN Pinouts: See Table 4-3
Use the 5 V SATA power connectors to connect to SATA device power connection.
Figure 4-2: 5 V SATA Power Connector Locations
Pin No. Description
1 +5V
2 Ground
Table 4-3: 5 V SATA Power Connector Pinouts
4.2.2 Audio Connector
CN Label: AUDIO1
CN Type:
10-pin box header
CN Location: See Figure 4-3
CN Pinouts: See Table 4-4