Owner's manual

ECN-360A-D2550 Embedded System
Page 16
Figure 3-4: Wi-Fi Antenna Installation
3.5 Mo u nt the System
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1: Turn the embedded system over.
Step 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.
Step 3: Secure the brackets to the system by inserting two retention screws into each
bracket as illustrated in Figure 3-5.
Figure 3-5: Mounting Bracket Retention Screws
Step 4: Drill holes in the intended installation surface.