User Manual

EC-1040GB Workstation
Page 35
Step 2: Mount the backplane into the chassis. Make sure the backplane is positioned so
that when the CPU card and PCI/ISA expansion cards are installed, both the
CPU card and the PCI/ISA card I/O connectors face the I/O brackets on the rear
panel.
Step 3: Align the retention screw holes in the backplane with the copper pillars installed
in Step 1.
Step 4: Insert retention screws to secure the backplane to the chassis (
Figure 4-11)
Figure 4-11: Backplane Retention Screws