User Manual

EC-1040GB Workstation
Page 24
screen should be placed face down on a soft working mat.
4.4 Installation Procedures
4.4.1 Preinstalled Components
The following components are preinstalled in the EC-1040GB rackmount workstation.
 Power supply unit (PSU)
 Cooling fan modules
 Drive brackets
 LCD screen
4.4.2 User Installed Components
The following user supplied components need to be installed into the EC-1040GB
rackmount workstation:
 Disk drives
 Backplane and CPU card, or motherboard
 PCI or ISA expansion cards (optional)
 Keyboard
4.4.3 Installation Steps
Complete the following steps to properly install the workstation:
Step 1: Open the top cover.
Step 2: Remove the CPU card clamp.
Step 3: Remove the disk drive brackets.
Step 4: Install the disk drives.
Step 5: Reinstall the disk drive bracket with the installed disk drives.
Step 6: Install the backplane.
Step 7: Install the CPU card.