User guide

DM Series Monitor
Page II
Revision
Date Version Changes
5 May, 2011 2.04 Added panel opening dimensions in Section 5.5.1
23 February, 2011 2.03
Minor changes
29 December, 2010 2.02
Updated Chapter 7 Software Drivers
09 December, 2010 2.01
Modified AV-6600 AD board information.
Updated Chapter 6 OSD Controls section
15 June, 2010 2.00
Updated for DM-xx-R20 series
16 July, 2009 1.14
Updated “Chapter
2
6: OSD Controls”
April, 2008 1.13 Added DM-121GX models information
Added DM-190 rack mount installation
Added the smartOSD appendix
July, 2007 1.12 Cautions for VESA mounting kit are added in p46, p140
May, 2007 1.11 AV-6600 AD Board CN25 connector pin 3 voltage changed to
+9V~+36V input
April, 2007 1.10 Updated Figure 1-3 and Section 4.4 for AV-6600 AD Board V2.0
March, 2007 1.01 Correct Figure 4-14 labeling
Revised CN7 connector as 12V power
Revised CN7 connector as 12V power; added connector pinouts
Correct LVDS connector label
July, 2006 1.00 Initial Release