Owner manual

DM Series Industrial Monitor
Page
39
2.3.8 DM-190 Connectors
The following is a list of the bottom panel peripheral device connectors used on the
DM-190 series industrial monitor.
 VGA connector
 DVI-D connector
 12V power connector
 9~36V terminal block (M models only)
 RS-232 serial connector (T-R models only)
2.4 Physical Dimensions
The following sections describe the physical dimensions for each model of the DM series
industrial monitor.
2.4.1 General Physical Dimensions
General physical dimensions for the DM series industrial monitors are shown in
Table 2-2.
Model
Width
(mm)
Height
(mm)
Depth
(mm)
DM-190 482 399 73
DM-170 452 356 65.2
DM-150 410 309 65.1
DM-121 340 260 58
DM-104 312 242 53
DM-84 244 178 49
DM-65 183 143 41
Table 2-2: General Physical Dimensions