Owner manual

DM Series Industrial Monitor
Page 138
NOTE:
When purchasing a cabinet/rack installation bracket, make sure it is
compatible with both the monitor and the cabinet/rack into which the
monitor is installed.
Step 2: Slide the monitor through the cabinet/rack bracket until the rear side of the
monitor frame is flush against the front of the bracket.
Step 3: Make sure the retention screw holes at the rear of the monitor frame are aligned
with the retention screw holes in the cabinet/rack bracket.
Step 4: Secure the cabinet/rack bracket to the monitor by inserting and tightening the
retention screws (
Figure 5-12).
Figure 5-12: Secure the Cabinet/Rack Bracket
Step 5: Slide the monitor with the attached cabinet/rack bracket into a rack or cabinet