Owner manual

DM Series Industrial Monitor
Page
137
Figure 5-11: DM-65 Panel Mounting
Step 5: Tighten the panel retention screws that pass through the panel mounting clips
until the plastic caps at the front of all the screws are firmly secured to the panel
(
Figure 5-11).Step 0:
5.5.2 Cabinet and Rack Installation
5.5.2.1 Standard Cabinet and Rack Installation
The standard cabinet/rack mounting procedure applies to the following DM series
industrial monitors:
 DM-170
 DM-150
 DM-121
 DM-104
To mount the DM series industrial monitor into a cabinet/rack, please follow the steps
below.
Step 1: The back of the metal frame surrounding the DM series industrial monitor has
several retention screw holes for a cabinet/rack installation bracket.