Owner manual

DM Series Industrial Monitor
Page 130
5.4.1 Rear Panel Connectors Overview
Figure 5-1: Monitor Rear Panel Connections
Figure 5-1 shows all the possible rear panel connectors for the DM series industrial
monitor. Refer to
Table 5-1 for a list of the monitors and their corresponding connectors.
The following sections fully describe the rear panel connectors for the DM series industrial
monitor.
5.4.2 VGA Connector
Use the rear panel standard 15-pin female VGA connector to connect the monitor to the
system graphics interface.
PIN DESCRIPTION PIN DESCRIPTION PIN DESCRIPTION
1 RED 6 GROUND 11 NC
2 GREEN 7 GROUND 12 DDCDAT
3 BLUE 8 GROUND 13 HSYNC
4 NC 9 NC 14 VSYNC
5 GROUND 10 GROUND 15 DDCCLK