User Manual

AVL-3000 Advanced Auto Data Server
Page 53
 Auto Recovery Function [Disabled]
Use the Auto Recovery Function BIOS option to enable or disable the auto recovery
function of the IEI One Key Recovery.

Disabled DEFAULT
Auto recovery function disabled

Enabled
Auto recovery function enabled
4.3.10 Power Management
Use the Power Management menu (BIOS Menu 14) to configure the power management
function.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
Power Management
Auto Power Off Voltage [9V]
Auto Power On Delay [10 sec]
Auto Power Off Delay [20 sec]
Set Auto Power Off
Voltage 8V~35V
---------------------
 : Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 14: Power Management
 Auto Power Off Voltage [9V]
Use the Auto Power Off Voltage option to set the automatic power-off voltage from 8V to
35V.
 Auto Power On Delay [10 sec]
Use the Auto Power On Delay option to set the automatic power-on delay time.
Configuration options are listed below.
 10 sec
DEFAULT