User Manual

AVL-3000 Advanced Auto Data Server
Page 27
Figure 3-20: RS-422/485 & GPIO Connector Pinout Location
3.7.9 USB Device Connection
There are four external USB connectors. To connect a USB device, please follow the
instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in
Figure 1-2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the front panel.
Figure 3-21: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0: