User Manual

AVL-3000 Advanced Auto Data Server
Page 88
Byte 4 define as A. (same with the PID code table on Wikipedia)
Byte 5 define as B. (same with the PID code table on Wikipedia)
Byte 6 define as C. (same with the PID code table on Wikipedia)
Byte 7 define as D. (same with the PID code table on Wikipedia)
As shown below:
Example 2: To Scan
Input: Z+CR (Use ASCII code as the input format of the firmware)
Output: CAN 11bits 250,1 NO SUPPORT+LF+CR
CAN 29bits 250,2 NO SUPPORT+LF+CR
CAN 11bits 500,3 NO SUPPORT+LF+CR
CAN 29bits 500,4 SUPPORT+LF+CR
(Use ASCII code as the input format of the firmware)