Owner manual

AUPS-C20 UPS Module
Page 11
2.3 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
AUPS-C20 was purchased from or contact an IEI sales representative
directly by sending an email to 38sales@iei.com.tw.
The AUPS-C20 is shipped with the following components:
Quantity Item Image
1 AUPS-C20 UPS module
4 Li-ion battery pack (optional)
1 Mounting bracket
1 DC output cable (DC plug to DC plug)
1 DC output cable (DC plug to 4-pin mini-DIN)
1 Power transfer cable (DC plug to 4-pin
mini-DIN)