User guide

AFL2-W21A/AB-H61
Page 56
4.13.3 Stand Mounting
To mount the AFL2-W21A/AB-H61 using the stand mounting kit, please follow the steps
below.
Step 1: Locate the screw holes on the rear of the AFL2-W21A/AB-H61. This is where
the bracket will be attached. (Figure 4-21)
Figure 4-21: Mounting screw location
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-W21A/AB-H61, insert the retention screws
into the screw holes and tighten them.