User guide

AFL2-W21A/AB-H61
Page 53
Step 9: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 10: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 4-17).
Ensure that all four of the mounting screws fit snugly into their respective slotted
holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-17: Chassis Support Screws
Step 11: Secure the panel PC by fastening the retention screw of the wall-mounting
bracket. (Figure 4-18). Step 0: