User guide

AFL2-W21A/AB-H61
Page 132
IO=2E8h; IRQ=3,
4, 7,10
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 7, 10
Device Mode [RS422]
Use the Device Mode option to select the serial port mode.
RS422 DEFAULT
Enables serial port RS-422 support.
RS485
Enables serial port RS-485 support.
7.3.9 H/W Monitor
The H/W Monitor menu (BIOS Menu 13) shows the hardware health status.
Aptio Setup Utility Copyright (C) 2011 American Megatrends, Inc.
Advanced
CPU Temperature :+62 C
Environment temperature 1 :+29 C
Environment temperature 2 :+30 C
SYSTEM temperature :+61 C
CPU FAN Speed :3166 RPM
CPU Smart Fan control [Auto Mode]
Temperature of Start(°C) 75
Temperature of Off(°C) 60
Start PWM 50
Slope(PWM) [4(PWM)]
Fanless Temp. Overwrite Control [Enabled]
Temperature of Fanless [32 C]
Fanless Temperature Reading :+24 C
The Temperature of
Fanless can be set after
this item has been
enabled.
---------------------

: Select Screen
: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 13: Hardware Health Configuration
PC Health Status
The following system parameters and values are shown. The system parameters that are
monitored are:
System Temperatures:
o CPU Temperature