Owner manual

AFL2-W19A/AB-H61
Page 71
5.14.3 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 1.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the AFL2-W19A/AB-H61. See Figure 5-24.
Figure 5-24: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.
The pinouts of the RJ-45 LAN connectors are shown below.
Pin Description Pin Description
1 LAN1_MDI0+ 2 LAN1_MDI0-
3 LAN1_MDI1+ 4 LAN1_MDI1-
5 GND 6 GND