Owner manual

AFL2-W19A/AB-H61
Page 24
Figure 2-14: Add Loop End
Step 23: Press the Run button to simulate.
2.3 iEi LED Run
To configure the LED light bars through a quick and easy way, please follow the steps
below:
Step 1: Make sure the LED Bar driver is properly installed. See Section 9.11.
Step 2: Double click the LED-RUN.exe icon
to open the LED RUN
software, as shown in Figure 2-15.
Figure 2-15: iEi LED RUN Software
Step 3: The LED light bars start to dash in a preset mode.