Owner manual

AFL2-W19A/AB-H61 Panel PC
Page 177
Step 9: The calibration screen in is shown. See Figure 9-24.
Figure 9-24: Calibration Screen
Step 10: Follow the instructions. The user is asked touch the screen at five specified
points after which the screen is calibrated. Step 0:
9.6 Audio Driver Ins tallation
To install the audio driver, please do the following.
Step 1: Access the driver list. (See Section 9.2)
Step 2: Click “Audio” and select the folder which corresponds to your operating system.
Step 3: Double click the setup file.
Step 4: The Audio Driver Welcome Screen in Figure 9-25 appears.
Step 5: Click Next to continue.