Instruction Manual

Page 147
AFL2-W15B-H61
8.4 Jumper Settings
The jumpers on the AFL2MB-15A motherboard are listed in Table 8-41.
Connector Type Label
LVDS panel voltage selection 3-pin header DJ2
LVDS panel 8-pin header DPANEL1
Table 8-41: Jumpers
8.4.1 LVDS Panel Voltage Selection Jumper (DJ2)
Pin Description
Short 1-2 +3.3 V
Short 2-3 +5 V (Default)
Table 8-42: LVDS Voltage Selection Jumper (DJ2) Settings
8.4.2 LVDS Panel Jumper (DPANEL1)
Pin Description
1-2
Open: high (Default)
Short: low
2-3
Open: high (Default)
Short: low
5-6
Open: high
Short: low (Default)
7-8
Open: high
Short: low (Default)
Table 8-43: LVDS Panel Jumper (DPANEL1) Settings