Instruction Manual

Page 128
AFL2-W15B-H61
Figure 7-6: Releasing the WLAN Card
Step 8: Grasp the WLAN card by the edges and carefully pull it out of the socket (
Figure
7-7).
Figure 7-7: Removing the WLAN card
Step 9: Install a new WLAN card by inserting the card into the slot at an angle
Step 10: Push the WLAN card down until the spring retainer clips lock into place.
Step 11: Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated
with a strip of black electrical tape. See
Figure 7-8.
NOTE:
To ensure the WLAN module functions correctly, please make sure the
WLAN antennas are attached in the proper configuration.